STI-1200CP6 STI Stopper II without Horn - Flush Mount - Red Fire Label
- Brand
- STI
- SKU:
- STI-1200CP6
Features
- Protective polycarbonate cover
- Helps stop false alarms
- Without horn
- Flush mount
- UL/cUL Listed, MEA 49-00-E, ADA Compliant
- 7" H x 5" W x 3.2" D
This unique and patented cover has been helping stop false fire alarms around the world for over 30 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind.
STI-1200 consists of a clear, tamperproof, super tough polycarbonate cover and frame that fits over most manual pull stations. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame until the cover is snapped back onto the frame. Additional models available with a built-in warning horn that sounds when cover is lifted to gain access to the pull station (see STI-1100).
Specifciations
Polycarbonate Enclosure
Features
- Flammability - UL94 V-2
- Wall Thickness - .095 inches
- NEMA Rating - Meets NEMA 3R when mounted to smooth non-masonry surfaces
Gaskets
Features
- Closed Cell IV2 with pressure sensitive adhesive
- Replace after 5 years
Horn
Features
- Low (95 dB @ 1 ft.)
Features
- 9V - 96mA
- 12V - 107mA
- 24V - 125mA
- High (105 dB @ 1 ft.)
Features
- 9V - 130mA
- 12V - 145mA
- 24V - 182mA
- Min. Operating Req.
Features
- 9V- 2V @ 20mA
- 12V - 4V @ 20mA
- 24V - 4V @ 20mA
Relay
Features
- Relay
Features
- 9V - 23mA
- 12V - 25mA
- 24V - 29mA
- Min. Activation Voltage
Features
- 9V - 3.7V
- 12V - 5.8V
- 24V - 5.8V
- Reset Voltage
Features
- 9V - 1.5V
- 12V - 3.3V
- 24V - 3.3V
- Dry Contact Rating (type Form "C")
Features
- 9V - <30V, 1A
- 12V - <30V, 1A
- 24V - <30V, 1A
Temperature Range
Features
- -40° to 120°F (-40° to 49°C)
- For temperatures below -4°F (-20°C) recommend using remote power source
Warranty
Features
- Three year guarantee against breakage of polycarbonate housing in normal use (one year on electro mechanical and electronic components).