STI-1155CR STI Stopper II With Horn & Spacer Indoor/Outdoor - Custom Label - Non-Returnable

• Cover is UV-stabilized.
• Designed for outdoor use.
• Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).
• 95 or 105 dB self-contained alarm. Complete with battery.
• STI-1155CR is for surface mount pull stations (flush mount - see STI-1150CR).
• The Stopper II design is a registered trade mark of Safety Technology International, Inc.
• UL Listed to U.S. and Canadian safety standards (for standard and custom labeling).
• Typical working properties of polycarbonate are -40^º to 250^ºF (-40^º to 121^ºC).

This unique and patented cover has helped stop false fire alarms around the world for over 30 years, without restricting legitimate alarms. Ideal for schools, hospitals, nursing homes, stores, hotels and public buildings of almost every kind.
STI-1155CR consists of a clear, tamperproof, super tough polycarbonate cover, frame, spacer, gaskets and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Specifciations

Polycarbonate Enclosure

• Flammability - UL94 V-2
• Wall Thickness - .095 inches
• NEMA Rating - Meets NEMA 3R when mounted to smooth non-masonry surfaces

Gaskets

• Closed Cell IV2 with pressure sensitive adhesive
• Replace after 5 years

Horn

• Low (95 dB @ 1 ft.)
  • 9V - 96mA
  • 12V - 107mA
  • 24V - 125mA
• High (105 dB @ 1 ft.)
  • 9V - 130mA
  • 12V - 145mA
  • 24V - 182mA
• Min. Operating Req.
  • 9V- 2V @ 20mA
  • 12V - 4V @ 20mA
  • 24V - 4V @ 20mA

Relay

• Relay
  • 9V - 23mA
  • 12V - 25mA
  • 24V - 29mA
• Min. Activation Voltage
  • 9V - 3.7V
  • 12V - 5.8V
  • 24V - 5.8V
• Reset Voltage
  • 9V - 1.5V
  • 12V - 3.3V
  • 24V - 3.3V
• Dry Contact Rating (type Form "C”)
  • 9V - <30V, 1A
  • 12V - <30V, 1A
  • 24V - <30V, 1A

Temperature Range

• -40° to 120°F (-40° to 49°C)
• For temperatures below -4°F (-20°C) recommend using remote power source

Warranty

• Three year guarantee against breakage of polycarbonate housing in normal use (one year on electro mechanical and electronic components).
• Electronic warranty form at www.sti-usa.com/wc14.

STI-1155CR Datasheet

STI-1155CR Manual