MVE-AN1W1-01Q Seco-Larm Wireless IR Repeater System Kit

Features:

• IR is compatible with all universal full band carrier frequency infrared remotes
• High IR sensitivity range (over 23' (7m))
• Long-range transmission (up to 656' (200m))
• 915MHz
• FSK modulation for strong signal sensitivity, Anti-RF interference, noise suppression
• IR carrier tuning frequency: 20~60 KHz
• Rx listen mode at 3.8mA (only)
• High receiving sensitivity (-90dBm)

The Enforcer Wireless IR Repeater Kit extends the IR signal from your remote control to remotely operate audio/visual equipment kept in a separate location or in a closed cabinet. The Wireless IR Repeater Kit allows for wireless transmission of IR signals over 915MHz RF, and RF interference is minimized with frequency hopping technology. The wide band IR receiver is capable of receiving IR signals from many types of remotes.

Specifications

• LED Indicators - IR Confirmation (blue)
• Operating Voltage - 5 VDC
• IR Receiver frequency - ±35° Off Axis
• IR Emitter frequency - 20~60 kHz
• IR Emitter Angle - ±11° Off Axis
• Connector type - Power : 1.3mm Coaxial center-pin-positive; Wired IR Receiver : 1/8" (3.5mm) TRS Mini-plug, Wired IR Emitter : 1/8" (3.5mm) Mono mini-plug
• Maximum extended range - 656' (200m)
• Operating humidity - 10~90%
• Operating temperature - -4°~140° F (-20°~60° C)
• Power supply - 5VDC/500mA
• Dimensions - Transmitter/Receiver : 1-3/4"x1-3/4"x1-1/4" (45x45x31 mm) Wired IR Receiver : 1-3/16"x1/4"x3/8" (20x7x10 mm) Wired IR Emitter : 5/8"x3/8"x3/16" (16x10x5 mm)
• Cable length - Wired IR Receiver : 5' (1.5m), Wired IR Emitter : 10' (3m)
• RF Frequency - 915MHz

MVE-AN1W1-01Q Datasheet