MVE-AH1T1-01YRQ Seco-Larm 1080p HDMI Receiver Only for MVE-AH1T1-01YQ

Features:

• Send video and audio over any two copper wires including Cat5e/6 cables, telephone wires, and coaxial cables
• 580mA @ 12VDC
• Receiver Only for MVE-AH1T1-01YQ

HDMI receiver to send video and audio over any two copper wires including Cat5e/6 cables, telephone wires, and coaxial cables. HDMI formats as large as 1080p can be transmitted up to 984ft (300m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

Specifications

• Input Video Signal - 3.3V
• Input DDC Signal - 5Vp-p (TTL)
• Maximum Single Link Range - 1080p
• Deep Color - 24bit
• Video Format Supported - High-speed HDMI, HDCP 1.3
• Audio Formats Supported - PCM
• Output Video - HDMI
• Resolutions Supported - 1080p/1080i/720p/576p/576i/480p/480i
• Range - Up to 984' (300m)
• Maximum Input Cable Length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Maximum Output Cable Length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Video Input Connector - HDMI Type A 19-pin female
• Video Output Connector - HDMI Type A 19-pin female
• IR Pass-through Frequency - 20~60 kHz
• Operating Voltage - 12VDC
• RS-232 Pass-Through - Up to 115,200
• Power Supply - 2A@12VDC (2 Adapters) (2.1mm plug)
• ESD Protection (Human Body Model) - ±8kV (Air-gap discharge), ±4kV (contact discharge)
• Current Draw Transmitter - 625mA@12VDC, Receiver: 580mA@12VDC
• Operating Temperature - 32°~140° F (0°~60° C)
• Dimensions - 5-1/8"x15/16"x3-7/16" (130x23x87 mm)
• Weight - 7.4-oz (210g) (Each)

MVE-AH1T1-01YRQ Datasheet