MVE-AH1T1-01YQ Seco-Larm HDMI Extender over Two Copper Wires/Cat5e/Cat6 Up to 1000ft at 1080p

Features:

• Extends HDMI over two wires
• Supports resolutions from 480i to 1080p with zero signal loss
• Transmits up to 984ft (300m) at 1080p over two wires
• Plug and play operation – comes as a complete set
• HDMI Loop output for local HDMI display
• Supports up to four (4) receivers for multicast applications
• Two (2) 12VDC power supplies included
• Bi-directional RS-232 pass-through
• IR Pass-through for remote control extension and operation

The ENFORCER HDMI Extender over Two Wires extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over any two copper wires including Cat5e/6 cables, telephone wires, and coaxial cables. HDMI formats as large as 1080p can be transmitted up to 984ft (300m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.

Specifications

• Input Video Signal - 3.3V
• Input DDC Signal - 5Vp-p (TTL)
• Maximum Single Link Range - 1080p
• Deep Color - 24bit
• Video Format Supported - High-speed HDMI, HDCP 1.3
• Audio Formats Supported - PCM
• Output Video - HDMI
• Resolutions Supported - 1080p/1080i/720p/576p/576i/480p/480i
• Range - Up to 984' (300m)
• Maximum Input Cable Length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Maximum Output Cable Length - 24AWG (15m), 26AWG (10m), 28AWG (5m)
• Video Input Connector - HDMI Type A 19-pin female
• Video Output Connector - HDMI Type A 19-pin female
• IR Pass-through Frequency - 20~60 kHz
• Operating Voltage - 12VDC
• RS-232 Pass-Through - Up to 115,200
• Power Supply - 2A@12VDC (2 Adapters) (2.1mm plug)
• ESD Protection (Human Body Model) - ±8kV (Air-gap discharge), ±4kV (contact discharge)
• Current Draw Transmitter - 625mA@12VDC, Receiver: 580mA@12VDC
• Operating Temperature - 32°~140° F (0°~60° C)
• Dimensions - 5-1/8"x15/16"x3-7/16" (130x23x87 mm)
• Weight - 7.4-oz (210g) (Each)

MVE-AH1T1-01YQ Datasheet