EAP-5D5Q Seco-Larm 5 Output Access Control Power Supply w/ Enclosure 5A@12VDC and 2.5A@24VDC

Features:

• AC power failure supervision relay.
• Battery failure supervision relay.
• Selectable 2.2KΩ End-of-Line (EOL) resistor for AC failure and battery failure supervision relays via DIP switch.
• Selectable delay timer (5 sec., 5 min., 5 hours) for AC failure supervision relay via DIP switch.
• Board designed with overload and short-circuit protection, including automatic shutdown and LED overload indicator.
• Over-current fuse-protected AC input.
• Built-in back-up battery charger (back-up battery is optional).
• Automatically switch to back-up battery if AC fails.
• Individual AC input and DC output LED status indicators.

The ENFORCER EAP-5D1Q and EAP-5D5Q power supplies are specifically designed for an access control system's electronic locks and accessories. These power supplies centralize the power sources of access control equipment. They include two supervision relays that can be used to integrate with other systems such as an alarm control panel. Robust fault response and indication also includes gradual shutdown on output overload as well as immediate shutdown on output short, signalled by flashing red LED and with auto-recovery once output short or overload is removed.

Specifications:

• Model Number - EAP-5D5Q
• Input Voltage - 110~240VAC
• Output Voltage - 12 or 24VDC selectable via DIP switch
• Adjustable Output - 11~15 @ 12VDC setting, via VR switch
• Voltage Range - 23~26 @ 24VDC setting, via VR switch
• No. of Outputs - EAP-5D1Q - 1, EAP-5D5Q - 5
• Supply Current - 5A@12VDC / 2.5A@24VDC
• AC Input Fuse Rating - 3.15A ( glass fuse )
• LED Status Indicator - AC input ( Green ), DC Output ( Red )
• End-of-Line Resistor (EOL) - Selectable ON ( 2.2KΩ) or OFF via DIP switch
• AC-Fail Relay Delay Timer - Selectable @ 5sec, 5min or 5hr via DIP switch
• Supervision Relays - Contact Rating: 3A@24VDC Dry Relay Output