E-9660-8B25 Seco-Larm 8 Beam 60" Curtain Sensor - Black

Features:

• Rugged aluminum construction.
• LED alignment indicator.
• No synchronizing wires required.
• NO/NC relay output.
• Weatherproof IP65 construction.
• Slimline design (7/8"x1-5/16").
• Trigger by simultaneously breaking 2 adjacent beams or any single beam (programmable).
• For windows, doorways, etc., where space is limited.
• L-brackets and mounting hardware included.

These infrared photobeam curtain/barrier sensors are perfect for installation in windows, doorways, skylights, fence tops, any place where space is limited.

Suitable for indoor and outdoor perimeter security, the trigger is programmable for simultaneous breaking of any single or 2 adjacent beams. The design features rugged aluminum construction, and an anti-tamper circuit for triggering an alarm if power is cut or the end cap is removed.

No synchronizing wires are required and the LED alignment indicator makes installation easy. L-brackets and mounting hardware are included.

Specifications:

• Model Number - E-9660-8B25
• Voltage - 12~24VDC
• Standby Current - 102mA
• Active Current - 92mA
• # of Beams - 8
• Max. range - 25' (8m) outdoor, 50' (16m) indoor
• Output - NO/NC relay output, 1A @ 12~24VDC
• Operating temperature - -49º~131º F (-45º~55º C)
• Attenuation LED - (On): powered, aligned properly,(Flash): when beam is broken,(Off): no power
• Length - 60-1/8" (153cm)
• Width x Height - 1-5/16"x7/8" (33.5x22.3 mm)
• Case - A1 alloy
• Response time - 0.5~60 ms
• Hardware - Mounting Bracket Included

E-9660-8B25 Datasheet

E-9660-8B25 Manual