E-964-S50TB Seco-Larm Multi-Frequency Single Photobeam

Features:

• 4 selectable frequencies to reduce interference
• Small size for a less conspicuous installation
• Simple to install
• Signal strength indicator for easier alignment
• Weatherproof for indoor/outdoor use (IP65)
• Built-in AGC control to filter out lighting disturbances
• LED indicators for power, signal strength, and trigger
• Mounting hardware included

The E-964-S50TB is a simple, easy-to-use, and easy-to-install single-beam infrared motion sensor with 4 selectable frequencies. The device easily installs almost anywhere to provide an invisible beam that, when broken, sends a signal to activate a light, beeper, or other device. This makes the device perfect for use as part of an access control system, a door or window monitor, a retail store customer alert, or many other places where the user needs to know that someone has entered a specific room or building or other protected area. The E-964-S50TB is weather-proof, and comes with a built-in AGC control circuit that helps to filter out possible disturbance caused by local lighting conditions.

Specifications

Sensors

• Type - IR Multi-Frequency Single Beam Sensor
• Number of Beam Frequencies - 4
• Number of Beams - 1
• Sensing Range - Up to 50ft (15m)
• Current Draw - Transmitter- 15mA@12VDC, Receiver- 30mA@12VDC
• Infrared LED Wavelength - 940nm
• Operating Voltage - 10~24VDC
• Interupt Speed - 50ms
• LED Beam Spread Angle - Approximately ±10°
• LEDs - (Transmitter) Green - Indicates connected to power
• LEDs - Red - Indicates transmitter and receiver are not aligned or beam is broken (Alarm)
• LEDs - Yellow - Indicates receiver's signal is weak or beam is broken (Signal)
• LEDs - Green - Indicates connected to power
• Output - NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC
• Enclosure - IP65
• Operating Temperature - -13°~131°F (-25°~55°C)
• Operating Humidity - 0~95%
• Weight - 2.6-oz (74g)
• Dimensions - 3-11/16"x2-3/8"x1-13/16" (94x60x46 mm)

E-964-S50TB Datasheet