E-964-Q660Q Seco-Larm 660ft. (200m) Outdoor Quad Photobeam Detector

Features:

• Built-in laser beam alignment system speeds accurate, reliable positioning.
• Multi-frequency (4 channels selectable).
• Quad infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
• Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case for indoor & outdoor use.
• Anti-frost system with built-in heater so that beam functions even in extreme conditions.
• Automatic input power filtering with special noise rejection circuitry.
• NO/NC alarm output.
• N.C. tamper circuit included.
• Non-polarized power inputs.
• Quick, easy installation with built-in laser beam and audible alignment system.
• Built-in alignment strength indicator.
• Interruption time adjustable for nearly all situations.

Specifications:

• Model Number - E-964-Q660Q
• Max. range (outdoor) - 660' (200m)
• Max. range (indoor) - 1320' (400m)
• Current - 160mA
• Power - AC/DC 12~24V (Non-polarity)
• Detection system - Simultaneous break of 4 beams
• Interrupt speed - 50msec~700msec (adjustable)
• Alarm output - NO./NC. relay, 1A@120VAC
• Tamper output - NC. switch, 1A@120VAC
• Alarm LED (Receiver) - Red LED ON: When transmitter and receiver are not aligned or when beam is broken
• Signal LED (Receiver)
  • Yellow LED - OFF: Beam aligned properly
  • FLASH: When receiver's signal weak
  • ON: Beam broken or beam alignment not proper
• Power LED (Rx & Tx) - Green LED (transmitter and receiver) ON: If power is applied.
• Laser wavelength - 650nm.
• Laser output power - 5mW.
• Alignment angle - Horizontal (+/-)90º, Vertical: (+/-)15º
• Operating temperature - -13º~+131º F (-25º~+55º C)
• Weight - 5.73-lb (2.6kg)
• Case - PC Resin

E-964-Q660Q Datasheet

E-964-Q660Q Manual