E-960-D90GQ Seco-Larm Twin Photobeam Detector

Features:

• Twin beams minimize false alarms from falling leaves, birds, etc.
• Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case
• Non-polarized power inputs
• Anti-frost system
• Automatic input power filtering with special noise rejection circuitry
• NC/NO trigger output
• NC tamper circuit included

Specifications

Sensors

• Type - Twin Photobeam Detector with Laser Beam Alignment
• Sensing Range - Outdoor- 90' (30m), Indoor- 190' (60m)
• Current Draw - 150mA
• Operating Voltage - 12-30V DC/AC 60Hz, 200mA (non-polarized)
• Interupt Speed - 10msec
• LEDs - Red - ON indicates transmitter and receiver not aligned or bream is broken
• LEDs - Yellow - ON indicates weak receiver signal or beam is broken
• LEDs - Green - ON indicates unit connected to power
• Alarm Output - SPDT NO/NC/COM relay, 1A@30 VDC/VAC
• Tamper Output - N.C. switch, 1A@30 VDC/VAC
• Laser Wavelength - 650nm
• Laser Output Power - <5mW.
• Alignment Angle - Horizontal (+/-)90º, Vertical: (+/-)5º
• Operating Temperature - -13º~+131º F (-25º~+55º C)
• Weight - 2.5-lb (1.1kg)
• Material/Case - PC Resin

Dual Beam

• Operating Temperature - -13°~131°F (-25°~55°C)

E-960-D90GQ Datasheet