DXS-91 Linear Supervised Glass Break Detector Transmitter

Features:

• Alarm, supervisory, and low battery transmissions
• Lithium battery powered
• Test, operate LED
• Shatter pro pattern recognition technology
• DXS format
• RF frequency: 315 MHz
• 4.25" W x 3.13" H x 1.7" D
• Order number: SSA00015

The Model DXS-91 Supervised Glass Break Detector Transmitter is a glass break detector with a built-in transmitter designed for use with Linear’s DXS and DX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control.
The digital DX code format features more than one million possible codes. Each transmitter is precoded at the factory to a unique code so no field coding is required. The DXS-91 can send three different signals: alarm, low battery and status.
The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.

Specifications

• Power - Two 3V 2450 lithium batteries (supplied)
• Battery Life - 18 months
• Measured Range - 1,000 feet, open air, with DVS-2400 control panel
• Code Outputs - Alarm, supervisory, and low battery
• Detection Method - Pattern recognition
• Temperature Range - 32° to 120° F (0° to 49° C)
• Dimensions - 4.25" W x 3.13" H x 1.7" D (108 x 80 x 43 mm)

DXS-91 Installation Manual