DA-500-GEN2 Mier DA500 GEN2 Drive-Alert Vehicle Detection and Asset Protection System Kit with DA-500CP GEN 2 Control Panel and DA-051-100 Sensor with 100ft Cable

Features:

• Includes a control panel with an internal chime with volume-control and a choice of three chime tones, and a sensor with 100' of cable
• Longer cable lengths are available up to 2500 feet
• Additional form C contacts and relays, including two timers, allow installers to attach and activate other systems such as chimes, sirens, lights, Drive-Alert Repeaters, NVR/DVR, cameras, gates, signs, etc., or interface with other security panels
• This system also includes +24V and +12V DC power sources for accessories
• Hard-wired or wireless chimes and lights can be easily added
• Zoning feature allows you to monitor two different areas!
• There is also a feature allowing you to mute, or pause operation for 5, 10 or 15 minutes if needed
• No wireless, Wi-Fi, Bluetooth, or internet signals are used making this the perfect off-grid system

The DA-500, GEN2, Drive-Alert Vehicle Detection System now includes a control panel with an internal alert whistle chime with volume control and choice of three chime tones, two built in timer relays, both 12VDC and 24VDC contacts for additional accessories, Zoning to provide two different chimes for two different areas monitored with different sensors, a system mute feature, one sensor, and 100 feet of cable. The DA-500 has a sensor which monitors a 10-foot radius (20' diameter) to detect disturbances in the magnetic field caused by vehicle traffic in driveways, farm lanes, intersections and any areas where knowledge of movement is desired. Up to three An additional sensors may be added to a DA-500. The DA-500 sensor is not a PIR or "beam" sensor. Thus, the DA-500 does not have the false alarms common to that type of sensor; such as being triggered by animals, fog, weather, etc.

DA-500-GEN2 Installation Manual

DA-500-GEN2 Specification PDF