AP-2-W-X STI Alert Point Lite Stand Alone Alarm System - No Label Included - White

• Stand alone, self-contained alarm system
• Integral resettable call point, simple key to reset, no broken glass or parts to replace
• Visible warning flag for quick activation identification
• Battery powered, 9V (included)
• Polycarbonate housing can take tough knocks in stride
• Offers a variety of tones and duration choices

Specifications

Components

• 9V PP3 Battery Power Source - Yes
• External Power Terminals (12-24 VDC) - No
• Network Terminals - Yes
• Relay Terminals (30 VDC, 1A) - No
• Sounder Output Terminals -No
• Beacon Output Terminals - No
• Detector & MCP Input Terminals - No
• Tamper Switch - No
• LED - No
• Master Key - Yes
• Reset Key - Yes

Features

• Sounder Durations (continuous, 30 secs, 2 mins & 20 mins) - Yes
• Beacon Time Durations (continuous, 30 secs, 2 mins & 20 mins) - No
• 7 Tones - Yes
• LED Healthy/Fault Indications - No
• Smoke Detector & MCP Connectivity - No
• Low Battery Indication - single beep (90 secs) - No
• Low Battery Indication - LED Flash (red) - Yes
• Networkable - No
• Audible Fault Indication - double beep (90 secs) - Yes
• Auto/Manual Reset Override - Yes
• Reset Key - Yes
• Housing Material - Polycarbonate
• Electrical Contact Material - Silver plated brass
• IP Rating - Indoor
• Operating Temperature - 0.5mm to 2.5mm
• Installation Terminal Conductor Size - SSDR (Samsung Super Dynamic Range) (Off / On)
• Standby Current - 45 uA
• Alarm Current (running from battery only)- 28mA (low volume) 32mA (high volume)
• Cable Entries - 7 cable entries
• Weight - 490g
• Dimensions - 125mm W x 170mm H x 58mm D
• Colours Available - Red, green, blue & white

AP-2-G-I Datasheet