9000017 Potter IFS-WPS Industrial Flow Switch

Features:

• Model: IFS-WPS
• Manufacturers Part#: 9000017
• Low turn radius (1.88") flow switch
• Used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM, and not classified as a hazardous fluid
• Serves as a way to start and stop electrically operated equipment when a flow or no flow condition occurs in a variety of applications
• When mounted in a horizontal pipe line the switch should be mounted on the top side of the pipe where it will be accessible
• Not recommended for installations where flow is downward

The Model IFS-WPS is a low turn radius (1.88") flow switch used in liquid flow lines carrying water or any fluid not harmful to brass, stainless steel, or EPDM, and not classified as a hazardous fluid. This switch can serve as a way to start and stop electrically operated equipment when a flow or no flow condition occurs in a variety of applications.

This device is designed for use only as an operating control. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of the installer to add devices (safety, limit controls) that protect against, or systems (alarm, supervisory systems) that warn of control failure.

Specifications

• Listings/Approvals - UL Guide (NKPZ) for industrial control equipment per UL Standard 508 Industrial Control Equipment, CSA Class (321106) for industrial control equipment per CSA Standard C22.2 No. 14-M Industrial Control Equipment, CE Marked
• Maximum Service Pressure - 250 PSI
• Enclosure - Die-cast housing and high impact resistant polycarbonate cover, not for use in hazardous locations
• Contacts - One SPDT (Form C) switch, 10 Amps at 125/250VAC, .5 Amps at 125VDC, .25 Amps at 250VDC
• Motor Ratings - 115VAC, 230VAC
• Horsepower - 115VAC: 1/3, 230VAC: 1/3
• AC F.L.A - 115VAC: 7.2, 230VAC: 3.6
• AC L.R.A - 115VAC: 43.2, 230VAC: 21.6
• Pilot Duty Rating - 332VA, 120/240VAC
• Environmental Specifications - Suitable for indoor or outdoor use with factory installed gasket and die-cast housing, NEMA 4 Rated Enclosure - use with appropriate conduit fitting
• Ambient Temperature Range - 32°F to 150°F (0°C to 66°C)
• Media Temperature Range - -20°F to 250°F (-29°C to 121°C)
• IFS-WPS Pipe Connection - 1 in. NPT Brass
• Conduit Entrance - One opening for 1/2" conduit
• Usage - For pipe sizes 1" - 8"

9000017 Datasheet