3992706 Potter PAD 100-ZM Conventional Zone Module

• Model Number: PAD 100-ZM
• Item Number: 3992706
• Compatible with conventional 2-wire smoke detectors
• IDC can be wired One (1) Class A or Two (2) Class B
• Monitors presence of 24VDC Aux Power
• SLC Class A, Class X & Class B
• Mounts in a standard 4" or double gang box
• Wiring terminals accessible when mounted in box

The PAD100-ZM module uses one (1) address on an SLC Loop when monitoring two (2) Class B or one (1) Class A circuit. The module requires and supervises a 24VDC auxiliary power connection. The 24VDC power source must be either a Potter IPA series addressable panel, or a Potter PSN series power supply. The IDC may be wired Class B or Class A which is selectable by an on board DIP switch. The PAD100-ZM employs one red LED to indicate the module’s status. In normal condition, the LED flashes when the device is being polled by the control panel. When a device is activated, the LED will flash at a fast rate.

Specifications

• Operating Voltage - 24.0V
• Max SLC Standby Current - 240?A
• Max SLC Alarm Current - 240?A
• Aux Power Required - 19 - 28V
• Max Detector Standby Current of IDC at 24 VDC - 1mA
• Max Module Alarm Current of IDC at 24 VDC - 50mA
• Max Wiring Resistance of IDC - 100?
• Max Wiring Capacitance of IDC - 1?F
• EOL Resistor - 5.1K ?
• Operating Temperature Range - 32 to 120ºF (0 to 49ºC)
• Operating Humidity Range - 0 to 93% (non-condensing)
• Max no. of Module Per Loop - 127 units
• Dimensions - 4.17" (106mm)L × 4.17"(106mm)W × 1.14" (29mm)D
• Mounting Options - Standard 4" Square or Double Gang Box
• Shipping Weight - 0.6 lbs

3992706 Datasheet