3008001 Potter WRTX-M SignaLink Wireless Transmitter

Features:

• Model Number - WRTX-M
• Item Number - 3008001
• UL 864 10th edition and ULC S527 Listed
• Fully supervised wireless communication bridge between all dry contact devices
• 2.4 GHz communication format
• Transmitter works on any dry contact product not listed as explosion proof
• Receiver provides dry contact output, compatible with any fire panel/fire alarm system
• Receiver does not require resetting or silencing, allowing it to beinstalled remotely from the FACP
• Eliminates the need for extensive wiring/conduits

The Potter SignaLink Bridge is a fully supervised wireless bridge designed to be attached to any non-explosion-proof dry contact sprinkler monitoring devices. It removes the need to hard wire sprinkler devices to each other, and operates on a 2.4 GHz frequency. Devices are able to communicate with each other up to a maximum of 800’. All enclosures are weather and UV resistant polycarbonate. There are no external antennas. The antenna is incorporated into the circuit board of each device.

Specifications

WTX-M Transmitter

• Conduit Connection - ½” NPT male
• Enclosure - UV and Impact resistant Polycarbonate
• Environmental Limitations - Indoor/Outdoor NEMA 4 / IP66 -40°F to 150°F (-40°C to 66°C)
• Max Circuit Current - 28uA
• Max Circuit Voltage - 3 VDC
• Power Requirement - Two AA size Energizer 1.5 volt Lithium Iron/Disulfide battery model L91, 3000 mAh
• Reference Level - Maximum Ambient noise level allowed: -37 dBm
• Service Use - NFPA 13, 13D, 13R and 72
• Weight - 0.5 lbs (0.23 KG)

3008001 Datasheet