1430566 Potter E2 D1xC1X05R 110dB(A) Radial Alarm & 5 Joule Xenon Strobe 24VDC - Red Enclosure - Clear Lens

Features:

• Model Number - D1XC1X05RDC024CN1A1C
• Item Number - 1430566
• Maximum sound pressure level output of 110dB(A)
• Automatic synchronisation on multi-beacon & sounder systems
• UL464 / CAN/ULC-S525 & UL1638 / CAN/ULC-S526

Featuring 64 alarm tone sounds, each of the available 4 stage/channels can be remotely triggered. Class D amplification provides a high sound output at optimum operating current. The threaded flameproof joint, multiple cable entries and duplicated, pluggable termination simplifies both installation and routine maintenance. The 24Vdc Class I version is approved for public (alarm horn) and private mode fire alarm use (strobe beacon).

Specifications

Alarm Horn

• Maximum output - 110dB(A) @ 1 metre [101dB(A) @ 10ft/3m], Class II version: 94dB(A) @ 1 metre [85dB(A) @ 10ft/3m]
• Nominal output - 105dB(A) @ 1m +/- 3dB – Tone 4 [96dB(A) @ 10ft/3m], Class II version: 90dB(A) @ 1 metre [81dB(A) @ 10ft/3m]
• No. of tones - 64 (UKOOA / PFEER compliant)
• No. of stages - 4
• Volume control - Full range
• Effective range - 125m/410ft @ 1KHz
• Voltages DC - 24Vdc (20-28Vdc)
• Voltages AC - 110-120Vac, 220-240Vac
• Stage switching
  • DC units - negative or positive
  • AC units - common supply line

Strobe Beacon

• Energy - 5 Joules (5Ws)
• Flash rates
  • Option 1 - 1Hz (60 fpm)
  • Option 2 - 1.5Hz (90 fpm)
  • Option 3 - Double Strike
• Eff. Intensity - 143 cd* – measured ref. to I.E.S
• Peak Candela - 46,976 cd* – measured ref. to I.E.S
• Eff. Intensity - 250 cd – calculated from energy (J)
• Peak Candela - 500,000 cd – calculated from energy (J)
• Lens colours - Amber, Blue, Clear, Green, Magenta, Red & Yellow
• Tube life - Emissions reduced to 70% > 5 million flashes

General

• Ingress protection - EN60529: IP66, UL50E / NEMA250: 4 / 4X / 3R / 13
• Enclosure material - Marine grade aluminium LM6 – copper free Chromated & powder coated – corrosion proof
• Enclosure colour - Red or Grey, custom colours available on request
• Cable entries - 1×1/2"NPT & 2xM20 – thread adaptors available
• Terminals - 0.5 – 2.5mm² (20-14 AWG) Pluggable, duplicated terminals
• Grounding stud - M5
• Line monitoring - Blocking diode included. EOL Min. 500 Ohm 2W, or 3k3 Ohm 0.5W resistor or diode (DC versions) can be fitted
• Enclosure volume - <2 litres
• Installation temp - -55 to +85°C [-67° to +185°F]
• Storage temp - -55 to +85°C [-67° to +185°F]
• Relative humidity - 99%
• Vibration test
• Jarring test - 3ft/lb Energy (UL464)
• Impact test - 3x 5lb (UL464)
• Relative humidity - 95% – Additional tropicalisation is recommended for applications where both high relative humidity and high ambient temperatures exist
• Weight - 4.9kg/10.9lbs

1430566 Datasheet