0090180 Potter PCMPK-1 Corrosion Probe Kit

• Model Number: PCMPK-1
• Item Number: 90180

The PCMPK consists of the necessary corrosion monitoring probes and pressure switches that, when added to the Potter Corrosion Monitoring Station, provides notifi cation to the fi re/sprinkler administrator when there may be an excessive amount of corrosion taking place in the sprinkler piping. The corrosion monitoring probe has a precision thin wall thickness which will eventually corrode through allowing the system water or air pressure to enter into the probe and actuate the pressure switch. When the pressure switch is wired to the building fi re alarm panel, a supervisory or trouble signal is generated notifying the fi re/sprinkler administrator. This is the notifi cation to remove the test coupons, that were installed at the same time as the probe(s), for analysis on the condition of sprinkler piping. The corrosion monitoring probes are single use devices and must be replaced upon the installation of new test coupons.

Kit Includes

• (1) corrosion monitoring probe and (1) pressure switch for PCMPK-1
• (2) corrosion monitoring probes and (2) pressure switches for PCMPK-2
• Bottom mounting pressure switch fi ttings-1" union, 1"-90° street elbow, and 1" nipple
• One pair of latex gloves

0090180 Datasheet